

刘应征



刘应征

中文名刘应征

代表作品《水动力学研究与进展 A辑》

民族汉族

目录导航

人物经历

1995-2000上海交通大学动力机械工程系（硕博连读）

1991-1995上海交通大学动力机械工程系

1. 1999.5 丹麦Dantec公司 PIV仪器培训

2. 2002.3-2004.2韩国科学技术院（KAIST）流动控制实验室访问学者

3. 2001.8-2007.11 上海交通大学动力机械工程系副教授

4. 2007.12-至今上海交通大学机械与动力工程学院教授

5. 2008-至今，机械与动力工程学院博士生导师

6. 2009.7至今，机械与动力工程学院副院长（国际化及公共关系）

研究方向

1. 热力系统气动力学及强度分析

2. 非定常流及流动控制（实验 & 数值计算）

3. 先进流动测试技术（PIV, PSV, PDPA, LIF, PSP...）

科研项目

1.2012-2015，国家自然科学基金项目“钝体尾流－压电薄膜涡激共振能量采集多场耦合机理的高频响TR-PIV实验研究”，项目主持人

2.2012-2014，国家自然科学基金项目“基于TR-PIV 流场测量与Curle 声类比理论的流动噪声测量技术研究”，主要参加人

3.2007-2009，国家自然科学基金项目“后缘尾涡脱落非定常流场涡声相关的实验研究”,项目主持人

4.2007-2009，国家自然科学基金国际合作交流项目“湍流场相干结构涡声相关实验和理论研究”，项目主持人

5.2004-2005，国家863重大专项分课题“超超临界汽轮机汽流激振的研究”，主要完成人

6.2009-2010，教育部重大项目“超超临界汽轮机汽轮机先进汽封技术的研究”，项目主持人

7.2005-2007，教育部回国留学人员启动基金“引射湍流流动的流-固-声耦合机理研究”，项目主持人

8.2009-2011，上海市科委社发处重大项目“IGCC燃气轮机压气机/涡轮的气动匹配研究”，项目主持人

9.2007－2009，上海市科委自然科学基金“喷雾流动的声激励控制”，项目主持人

10.2011-2012，上海核工程研究院项目 ***，项目主持人

11.2011-2012，上海航天基金项目 ***，项目主持人

12.2011-2012，上海电气电站集团“超临界汽轮机蝶阀气动特性研究”，项目主持人

13.2006-2009，上海电气电站集团“1000MW超超临界汽轮机阀门蒸汽流场分析”，项目主持人

14.2008-2010，上海电气电站集团“660MW超超临界汽轮机高温强度分析”，项目主持人

15.2009-2010，上海电气电站集团“核电汽轮机应力腐蚀分析”，项目支持人

论文专著

1.Ying Zheng LIU, Liu Liu SHI, Jun YU, TR-PIV Measurement of Wake behind a Grooved Cylinder at Low Reynolds Number, Journal of Fluids and Structures, 2011, 27(3): 394-407

2.Y.Z.Liu, L.L.Shi, Q.S.Zhang, Proper Orthogonal Decomposition of Wall-pressure Fluctuations under the Constrained Wake of a Square Cylinder, Experimental Thermal and Fluid Science, 35(7), 2011, 1325-1333

3.Liuliu Shi, Yingzheng Liu, Jun Yu, PIV measurement of the separated flow over a blunt plate with different chord-to-thickness ratios. Journal of fluids and structures (SCI), 2010, 26: 644-6573.

4.Liuliu Shi, Yingzheng Liu, Hyungjin Sung, On the wake with and without vortex shedding suppression behind a two-dimensional square cylinder in proximity to a plane wall，Journal of wind engineering and industrial aerodynamics (SCI), 2010, 98: 492-5032.

5. W. Z. Wang, Y. Z. Liu, G. Meng and P. N. Jiang, A nonlinear model of flow-structure interaction between steam leakage through labyrinth seal and the whirling rotor, Journal of Mechanical Science and Technology, 23(12), 2009, 3302-3315

6. Liu Liu Shi, Ying Zheng Liu, Jin Jin Wan， Influence of wall proximity on characteristics of wake behind a square cylinder: PIV measurements and POD analysis， Experimental Thermal and Fluid Science, 34(1), 2010, 28-36

7. Liu Liu SHI, Ying Zheng LIU, Jin Jin WAN，TR-PIV measurement of separated and reattaching turbulent flow over a surface-mounted square cylinder， Journal of Mechanical Science and Technology, 24(1), 421-428,2010

8. Qi Sun, Dawei Wan, Jinfen Liu, Yingzheng Liu, Ming Zhu, Haifa Hong, Yanjun Sun, Qian Wang, Influence of antegrade pulmonary blood flow on the hemodynamic performance of bidirectional cavopulmonary anastomosis: a numerical study, Medical Engineering & Physics 31(2)，227-233，2009.

9. Qi Sun, Dawei Wan, Jinfen Liu, Haifa Hong, Yingzheng Liu and Ming Zhu, Patient-specific Computational Fluid Dynamic Simulation of A Bilateral Bidirectional Glenn Connection. Medical & Biological Engineering & Computing. 46(11)，1153-1159，2008.

10. W.Z.Wang, Y.Z.Liu, P.N.Jiang, H.P.Chen, Nonlinear analysis of orbital motion of the rotor subject to leakage air flow through an interlocking seal, Journal of Fluids and Structures 25(5)，751-765，2008

11. Y.Z.Liu, , H.J.Sung, Unsteady separated and reattaching turbulent flow over a two-dimensional square-edged rib, Journal of Fluids and Structures 24(3)，366-381，2009.

12. Y.Z.Liu, W.Z.Wang, H.P.Chen, , Y.Yuan, Influence of leakage flow through labyrinth seal on rotordynamics: numerical calculations and experimental measurements, Archive of Applied Mechanics 77(8),599-612,2007.

13. Y.Z. Liu, , H.P.Chen, H.J.Sung, A wall-bounded turbulent mixing layer flow over an open step: II. Unsteady characteristics, Journal of Turbulence 8(26),1-17，2007.

14. W.Z.Wang, Y.Z. Liu, H.P. Chen and P. N. Jiang, Computation of Rotordynamic Coefficients Associated with Leakage Steam Flow through Labyrinth Seal, Archive of Applied Mechanics 77(8),587-597,2007.

15. S.J.Chun, Y.Z.Liu, H.J.Sung, Multi-resolution analysis of the large-scale coherent structure in a turbulent separation bubble affected by unsteady wake, Journal of Fluids and Structures 23(1),85-100,2007

16. Y.Z.Liu,Z.M.Cao.Recent progress in particle image velocimetry in China, Journal of Hydrodynamics, Ser.B 18(1),11-19,2006

17. Y.Z. Liu, W.Kang, and H.J.Sung, Assessment of The Organization of The Turbulent Separated and Reattaching Flow by Using Wall Pressure Fluctuations”, Experiments in Fluids 38(4),485-493,2005.

18. B.J.Kim, Y.Z.Liu, H.J. Sung. Micro PIV Measurement of Two-fluid Flow With Different Refractive Indices. Measurement Science and Technology 15(6),1097-1103,2005

19. Sejong Chun, Y.Z. Liu ,Hyung Jin Sung. Wall pressure fluctuations of a turbulent separated and reattaching flow affected by an unsteady wake, Experiments in Fluids 37(4), 531-546,2004

20. Y.Z. Liu,B.J. Kim and H.J.Sung. Two-fluid mixing in a microchannel., International Journal of Heat and Fluid Flow 25(6),986-995,2004.

21. Y.Z Liu, H.S. Koyama and H.P Chen, Experimental Investigation on Spin-up and Spin-down Rotating Flow with Vortex Breakdown via PIV, Journal of Hydrodynamics. Series B 15(2),2003

22. Y.Z Liu, H.P Chen, H.S. Koyama, 3D Flow Inside Bubble-Type Vortex Breakdown: An Experimental Investigation via PIV, Journal of Hydrodynamics, Series B 15(3),2003

23. 邬文睿,王炜哲,蒋普宁,刘应征,陈汉平.超超临界汽轮机高压转子高温蠕变寿命的数值分析.动力工程,2009,29(2):99-103.

24. 邬文睿,万津津,王炜哲,刘应征.600MW亚临界机组主调阀蒸汽流动损失数值分析.水动力学研究与进展A辑,2008,23(5):501-506.

25. 万津津,施鎏鎏,余俊,刘应征.贴壁方柱湍流场TR-PIV实验研究.实验流体力学,2009,23(2).31-35.

26. 王炜哲,刘应征,叶春,忻建华,陈汉平,葛庆,袁鹰.汽轮机轴封－转子系统动力学特性的数值分析.动力工程,2007.27（6）:845-849.

27. 王炜哲,刘应征,陈汉平,叶春,忻建华.迷宫轴封气流周向剪切力对转子动态特性系数的影响.动力工程,2007,27（5）:717-720.

28. 柯峰，刘应征，陈汉平，湍流壁面脉动压力场测量技术：传声器阵列.空气动力学学报，2007,25(3):400-403.

29. 王炜哲, 刘应征, 陈汉平等. 迷宫密封－转子系统动力学特性的实验和数值研究[J].《机械工程学报》，2007, 43(3): 22-27.

30. 王炜哲，施鎏鎏，刘应征等. 1000MW超临界机组主调阀内流动和噪声计算分析[J].《动力工程》,2007，27(3): 401-405.

31. Q.S.Zhang, Y.Z.Liu, Wall-pressure-fluctuations of Separated and Reattaching Flow over Blunt Plate with chord-to-thickness ratio c/d = 9.0, Experimental Thermal and Fluid Science, in press, 2012